Twin Scan "3" ABS Low Cost Scan Tool

 

TEC # Description / Fits  
TEC #

34268

 Compatible with 2011-2014 Softail ,2012-2014 Dyna and 2014 Sportster and 2014 up Touring models with CAN data bus

 Anti-skid brake system (ABS) brake bleeding functions. 

 Uses laptop PC for display. Includes Windows software

 Reads and clears diagnostic trouble codes from engine control module (ECM), BCM (body control module), speedometer, tach, and anti-skid braking system (ABS)

 Real time display of engine data on instrument panel type display

 Built-in data logging. Stores up to one hour of data. Automatically triggers when a trouble code is set. Shows data before and after code is set

 Includes two analog inputs with 0-20V or 200V range. Twin Scan 3 features two channel scopemeter capability for waveform display. The analog inputs can also be used for air/fuel ratio (AFR). All Twin Scan 3 units can be upgraded to Twin Scan 3 Plus for use as tuning aid

 Compact size: 3.2"L x 2.2"W x 1.0"H

 

 Reads and clears diagnostic trouble codes from engine control module (ECM), BCM (body control module), speedometer, tach, and anti-skid braking system (ABS)

DDT#15300

 

Twin Scan "2" ABS Low Cost Scan Tool

 

TEC # Description / Fits
TEC #

34250

 

 

 Reads and clears diagnostic trouble codes from engine control module (ECM), turn signal/security module (TSM/TSSM), speedometer, tach, and anti-skid braking system (ABS).

 Compatible with 2001-2014 H-D fuel injected models using Delphi system (including V-Rod) with J1850 data bus and 2003-2006 carbureted models with new 12 pin ignition module. Includes Up to 2013 Touring Models

Note: Not compatible with:

2011 up Softail models with CAN Bus

2012 up Dyna Models with CAN Bus

2014 up Touring Models with CAN Bus

  Support for new 2006 and later closed loop fuel injection systems

 Displays throttle position and twist grip sensor data on new 2008-2013 touring models with electronic throttle control

 Uses laptop PC for display. Includes Windows software

 Real time display of engine data on instrument panel type display

 Built-in data logging. Stores up to 45 minutes of data. Automatically triggers when a trouble code is set. Shows data before and after code is set

 Includes two analog inputs for air/fuel ratio (AFR). All Twin Scan II ABS units can be upgraded to a Twin Scan II ABS Plus  for use as tuning aid

 Compact size: 3.1"L x 1.6"W

 

DDT#15202
 
 

Twin Scan "2" ABS "Plus" Tool

Tuning Aid for Screamin Eagle Pro Super Tuner, Screamin Eagle Race Tuner (SERT), Dynojet Power Commander, and Daytona Twin Tec Twin Tuner

 Includes the WEGO IIID dual channel wide-band oxygen sensor system for logging front and rear cylinder air/fuel ratio (AFR) data along with engine data 

TEC # Description / Fits  
TEC #

34251

 Ideal tuning aid for Screamin Eagle Pro Super Tuner, Screamin Eagle Race Tuner (SERT), Dynojet Power Commander, and Daytona Twin Tec Twin Tuner. Twin Scan software analyzes logged data and displays AFR and the required volumetric efficiency (VE) correction (in percent) with the same RPM rows and throttle position sensor (TPS) or manifold pressure (MAP) columns used in these systems' tables. 

 Twin Scan II software can directly copy and paste to an Excel spreadsheet that you can use to calculate the required corrections and then copy and paste the data to the Super Tuner or Power Commander software. You can also directly export calculated fuel correction data to Twin Tuner data files.  

 
 
TEC # Description / Fits  
34270
 

Dual Channel WEGO III Wide-Band Exhaust Gas Oxygen Sensor System with Air-Fuel Ratio display.

Includes WEGO III dual display unit, 96 wire harness, two Bosch LSU4.2 sensors, two 18x1.5mm weld nuts, and software on CDROM.

DDT# 112005