Sprocket Shafts by JIMS
 

TEC #

 

Jims

 
89315 Use on Big Twin Late 1981-Early 1985 for H.D.Ū Flywheels, & all aftermarket flywheels, single cam only. (Note: Includes Aftermarket and S & SŪ engines.) 23909-80  
89313 1/4” longer. Use to give more sprocket contact to shaft when using big rear wheel conversion kit.

Use on Big Twin single cam only Late1981-Early 1985 and 1970-present with aftermarket flywheels.    

23909-80 -1/4  
89314 3/4” longer. Use to give more sprocket contact to shaft when using big rear wheel conversion kit. Some outer primaries may need clearance.

Use on Big Twin single cam only Fit:Late1981-Early 1985, and 1970-present with aftermarket flywheels.

23909-80 -3/4  
       
89323 Use on Big Twin 1972-81. Sprocket shaft does not have keyway 24001-72  
89322 Use on Big Twin 1970-71 24001-70  
89321 Use on Big Twin ‘65-69 24001-65  
  See Special Sprocket Shaft Below for other Big Twin 1965-69    
89320 Use on Big Twin ‘56-64 24001-56  
89319 Use on Big Twin ‘55 only 24001-55  
89318 Use on Big Twin ‘30-54 24001-30  
89311 Use on  45”    1929-73 24000-29  
 
Special Big Twin Sprocket Shafts by JIMS
TEC #  

Jims

 
89324 Use for 80” fly wheels to PanHead cases.  Use on Big Twin 1956-64, to install 1972-Early 1981,74” & 80” flywheels in PanHead cases. Sprocket shaft does not have keyway 24001-56/72  
89325 Use on Big Twin 1965-69, to install 1972-Early 1981,74” & 80” flywheels in PanHead and Shovelhead cases. Sprocket shaft does not have keyway. 24001-65/72  
89312 Use on Big Twin 1965-69, to install Late 1981-Early1985 flywheels or aftermarket flywheels in PanHead and Shovelhead cases. Has keyway for aftermarket flywheels. 24001-65/80  
 
Sportster Sprocket Shafts by JIMS
TEC #   Jims  
89326 Use on Sportster L81-86 24001-80  
89317 Use on Sportster ‘77-E81 24000-75  
89317 Use on Sportster ‘57-76 24000-57  
 
Big Twin Pinion Shafts by JIMS
TEC #   Jims  
89329 Use On Big Twin ‘87-99 24006-87  
89335 Use On Big Twin ‘81-86 24006-81  
89334 Use On Big Twin ‘73-E81 24006-73  
89333 Use On Big Twin ‘58-72 24006-58  
89332 Use On Big Twin ‘54-57 24006-54  
89331 Use On Big Twin ‘39-53 24006-35  
89328 Use On K Model ‘52-57 24005-52  
89339 Use On 45” ‘37-73 24005-37  
 

Sportster Pinion Shafts by JIMS

89338 Sportster ‘81-85 24005-80  
89337 Sportster ‘77-E81 24008-75  
89330 Sportster ‘57-76 24005-57  
 

Nuts for Pinion & Sprocket Shafts by JIMS

89271  Big Twin Sprocket shaft nuts For 1972-85.

 1 - 1/8”-16 Thread Sprocket Shaft Nuts.  Use on all -72 & on all -80 sprocket shafts. Use  (Note: Includes Aftermarket and S&SŪ engines.  

24071-80  
89272 Big Twin Sprocket shaft nuts for 1930-70.

3/4”-18 Thread Sprocket Shaft Nuts -  (Note: Includes Aftermarket and   S&SŪ engines.

24023-36  
       
89265 Sprocket Shaft Nuts - Use on 74” 1930-54. Use on 80” Side valves 1937-48. 11/16”-18 Thread  24003-30  
89266 Sprocket Shaft Nuts - 7/8”-14 Thread Use on Big Twin 1955-present (For belt drives, and non-compensating sprockets). Note: Including Twin Cam 88™. (Note: Includes Aftermarket and S &SŪ engines. 24003-55  
       
89270  Big Twin Pinion Gear shaft nut ‘81-99 24016-80  
89269 Big Twin Pinion gear nut ‘90-92 24022-90  
89274 Big Twin Pinion shaft nut ‘54-89 24023-54  
       
89273 Sportster ‘81-85 Sprocket/Pinion nut   3/4”-20 Thread  
 24902-81